D-Link DSR-500 User Manual

Unified Services Router User Manual
56
4.2.3 RADIUS Authentication
Setup > Wireless Settings > RADIUS Settings
Enterprise Mode uses a RADIUS Server for WPA and/or WPA2 security. A
RADIUS server must be configured and accessible by the router to authenticate
wireless client connections to an AP enabled with a profile that uses RADIUS
authentication.
 The Authentication IP Address is required to identify the server. A
secondary RADIUS server provides redundancy in the event that the primary
server cannot be reached by the router when needed.
 Authentication Port: the port for the RADIUS server connection
 Secret: enter the shared secret that allows this router to log into the
specified RADIUS server(s). This key must match the shared secret on the
RADIUS Server.
 The Timeout and Retries fields are used to either move to a secondary server
if the primary cannot be reached, or to give up the RADIUS authentication
attempt if communication with the server is not possible.

D-Link DSR-500 Specifications

General

Brand	D-Link
Model	DSR-500
Category	Network Router
Language	English