D-Link DWR-116 User Manual

84D-Link DWR-116 User Manual
Appendix B - Networking Basics
Statically Assign an IP address
If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:
Step 1
Windows
®
Vista
™
- Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network Connections.
Windows
®
XP - Click on Start > Control Panel > Network Connections.
Windows
®
2000 - From the desktop, right-click My Network Places > Properties.
Step 2
Right-click on the Local Area Connection which represents your network adapter and select Properties.
Step 3
Highlight Internet Protocol (TCP/IP) and click Properties.
Step 4
Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router.
Example: If the router´s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between 2 and 99. Make sure that the
number you choose is not in use on the network. Set Default Gateway the same as the LAN IP address of your router (192.168.0.1).
Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from
your ISP.
Step 5
Click OK twice to save your settings.

D-Link DWR-116 Specifications

Data Rates and Standards

data rates in 802.11n mode	300, 150, 135, 120, 90, 60, 45, 30, 15 Mbps
data rates in 802.11g mode	6/9/11/12/18/24/36/48/54Mbps
data rates in 802.11b mode	1/2/5.5/11Mbps

Frequency and Security

frequency	2.4 - 2.4835 GHz
wireless security	64/128-bit WEP, WPA & WPA2

Ports and Antenna

ports	4 x LAN (RJ-45), 1x WAN, 1 x USB

Power and Dimensions

power adapter	External 5 V DC 2 A
dimensions	148.5 x 113.5 x 25 mm, 5.85 x 4.47 x .98 inches

Operating Environment

operating temperature	0 to 40 °C, 32 to 104 °F
operating humidity	10% to 95% non-condensing