D-Link DWR-730 User Manual

43D-Link DWR-730 User Manual
Section 3 - Conguration
Standby Mode
This section allows you to congure the router’s automatic power-saving modes.
Check the box to enable the automatic power saving
features.
Enter the number of minutes after which the router will enter
standby mode if no activity is detected.
Enter the number of minutes after which the router will enter
hibernate mode if no activity is detected.
Enter the number of minutes after which the router will shut
down if no activity is detected.
Click Apply to save the current conguration.
Enable Auto
Power Saving:
Enter Standby
Mode:
Enter Hibernate
Mode:
Auto Power O:

D-Link DWR-730 Specifications

General

wireless standard	802.11g/b, compatible with 802.11n
Micro USB port	Yes
MicroSD slot	Yes
frequency bands	850/900/1800/1900 MHz
Power Class	4 (850/900 MHz), 1 (1800/1900 MHz)
frequency bands	850/1900/2100 MHz, 900/1900/2100 MHz
Power Class	3 (+24 dBm)
HSUPA Downlink	Up to 21.6 Mbps
HSUPA Uplink	Up to 5.76 Mbps
802.11n mode	Up to 150 Mbps
802.11g mode	6/9/11/12/18/24/36/48/54 Mbps
802.11b mode	1/2/5.5/11 Mbps
WEP	64/128-bit
WPA & WPA2	Yes
Built-in NAT	Yes
Built-in firewall	Yes
Type	Internal 3G and Wi-Fi antenna
Capacity	1500 mAh rechargeable
Indicators	SMS, Signal, Battery, Wi-Fi
Operating Temperature	-10 to 55 ˚C (14 to 131 ˚F)
Operating Humidity	10% to 90% (Non-condensing)
CE	Yes
FCC	Yes

Weight and Dimensions

Dimensions (L x W x H)	90 x 50 x 12 mm