Name: D-Link DWR-730
Brand: D-Link
Rating: 5 (1 reviews)

To Next Page

To Previous Page

71D-Link DWR-730 User Manual

Appendix A - Networking Basics

Assign a Static IP address

Step 2

Right-click on the Local Area Connection which represents your network adapter and select Properties.

Step 3

Highlight Internet Protocol (TCP/IP) and click Properties.

Step 4

Click Use the following IP address and enter an IP address that is on the same subnet as your network

or the LAN IP address on your router.

Example: If the router´s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a

number between 2 and 99. Make sure that the number you choose is not in use on the network. Set

Default Gateway the same as the LAN IP address of your router (192.168.0.1).

Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is

not needed or you may enter a DNS server from your ISP.

Step 5

Click OK twice to save your settings.

Click on Start > Control Panel > Network and Internet Connections > Network Connections > Congure your Internet

Protocol (IP) settings.

Step 1

If you are not using a DHCP capable gateway/router or you need to assign a static IP address, please follow the steps below:

Windows

Vista

™

Windows

Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network Connections.

Click on Start > Control Panel > Network Connections.

Other manuals for D-Link DWR-730

Questions and Answers:

Need help?

Do you have a question about the D-Link DWR-730 and is the answer not in the manual?

General