D-Link DWR-730 User Manual

53D-Link DWR-730 User Manual
Section 4 - Connecting to a Wireless Network
Using Windows 7
Windows 7 users may use the built-in wireless utility to connect to a wireless network. If you are using another party’s utility or Windows 2000,
please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option
similar to the Windows 7 utility as seen below.
If you receive the Wireless Networks Detected bubble, click on the center of
the bubble to access the utility. You can also click on the wireless icon in your
system tray (lower-right corner).
The utility will display any available wireless networks in your area.
Wireless

D-Link DWR-730 Specifications

General

wireless standard	802.11g/b, compatible with 802.11n
Micro USB port	Yes
MicroSD slot	Yes
frequency bands	850/900/1800/1900 MHz
Power Class	4 (850/900 MHz), 1 (1800/1900 MHz)
frequency bands	850/1900/2100 MHz, 900/1900/2100 MHz
Power Class	3 (+24 dBm)
HSUPA Downlink	Up to 21.6 Mbps
HSUPA Uplink	Up to 5.76 Mbps
802.11n mode	Up to 150 Mbps
802.11g mode	6/9/11/12/18/24/36/48/54 Mbps
802.11b mode	1/2/5.5/11 Mbps
WEP	64/128-bit
WPA & WPA2	Yes
Built-in NAT	Yes
Built-in firewall	Yes
Type	Internal 3G and Wi-Fi antenna
Capacity	1500 mAh rechargeable
Indicators	SMS, Signal, Battery, Wi-Fi
Operating Temperature	-10 to 55 ˚C (14 to 131 ˚F)
Operating Humidity	10% to 90% (Non-condensing)
CE	Yes
FCC	Yes

Weight and Dimensions

Dimensions (L x W x H)	90 x 50 x 12 mm