xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
5
Available commands:
.. ? cable_diag cd
cfm change clear config
copy create debug del
delete dir disable download
enable erase format login
logout md move no
ping ping6 rd reboot
reconfig rename reset save
show smtp telnet traceroute
traceroute6 upload
The top-level commands consist of commands such as show or config. Most of these commands
require one or more parameters to narrow the top-level command. This is equivalent to show what? or
config what? Where the what? is the next parameter.
For example, entering the show command with no additional parameters, the CLI will then display all
of the possible next parameters.
Command: show
Next possible completions:
802.1p 802.1x aaa access_profile
account accounting acct_client address_binding
arp_spoofing_prevention arpentry asymmetric_vlan
attack_log auth_client auth_diagnostics
auth_session_statistics auth_statistics authen
authen_enable authen_login authen_policy authentication
authorization autoconfig bandwidth_control boot_file
bpdu_protection broadcast_ping_reply cfm
command command_history community_encryption
config cpu current_config ddm
device_status dhcp dhcp_local_relay dhcp_relay
dhcp_server dhcpv6 dhcpv6_relay dhcpv6_server
dnsr dos_prevention dot1v_protocol_group
dscp duld eee
egress_access_profile egress_flow_meter environment
erps error ethernet_oam external_alarm
fdb filter flow_meter gratuitous_arp
greeting_message gvrp hol_prevention host_name
igmp igmp_proxy igmp_snooping ip_tunnel
ipfdb ipif ipif_ipv6_link_local_auto
ipmc_vlan_replication ipmc_vlan_replication_entry
iproute ipv6 ipv6route jumbo_frame
To Next Page
Loading...
Need help?
General