D-Link xStack DGS-3420 Series User Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
266
Format
debug ripng state enable
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To enable RIPng debug globally:
DGS-3420-28SC:admin# debug ripng state enable
Command: debug ripng state enable
Success.
DGS-3420-28SC:admin#
19-31 debug show status
Description
Show the debug handler state and the specified module’s debug status.
If the input module list is empty, the states of all registered modules which support debug module will
be shown.
Format
debug show status {module <module_list>}
Parameters
module – (Optional) Specifies the module list.
<module_list> - Enter the module list here.
Restrictions
Only Administrator-level users can issue this command.
Example
To show the specified module’s debug state:

D-Link xStack DGS-3420 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3420 Series
Category	Switch
Language	English