xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
12
Format
disable password encryption
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To disable password encryption:
DGS-3420-28SC:admin#disable password encryption
Command: disable password encryption
Success.
2-4 config account
Description
When the password information is not specified in the command, the system will prompt the user to
input the password interactively. For this case, the user can only input the plain text password.
If the password is present in the command, the user can select to input the password in the plain text
form or in the encrypted form. The encryption algorithm is based on SHA-1.
Format
config ac
count <username 15>
{encrypt [plai
n_text | sha_1
] <password>}
Parameters
<username 15> - Specify the name of the account. The account must already be defined. This name
can be up to 15 characters long.
encrypt - (Optional) Specify the encryption type, plain_text or sha_1.
plain_text - Specify the password in plain text form. For the plain text form, passwords must have
a minimum of 0 and a maximum of 15 characters. The password is case-sensitive
sha_1 - Specify the password in the SHA-1 encrypted form. For the encrypted form password, the
length is fixed to 35 bytes long. The password is case-sensitive.
<password> - Specify the password.
To Next Page
Need help?
General