D-Link xStack DGS-3420 Series User Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
707
falling_alarm - (Optional) Specify the trap state for falling alarm. The default state is enabled.
enable - Enable the trap state for falling alarm.
disable - Disable the trap state for falling alarm.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To disable the trap state for RMON:
DGS-3420-28SC:admin#config rmon trap rising_alarm disable
Command: config rmon trap rising_alarm disable
Success.
DGS-3420-28SC:admin#
62-24 show rmon
Description
This command is used to display RMON related settings.
Format
show rmon
Parameters
None.
Restrictions
None.
Example
To display current RMON settings:
DGS-3420-28SC:admin#show rmon
Command: show rmon
RMON Rising Alarm Trap : Enabled
RMON Falling Alarm Trap : Enabled
DGS-3420-28SC:admin#

D-Link xStack DGS-3420 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3420 Series
Category	Switch
Language	English