D-Link xStack DGS-3420 Series User Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
239
Parameters
None.
Restrictions
None.
Example
To display the authorization status:
DGS-3420-28SC:admin#show authorization
Command: show authorization
Authorization for Atributes: Enabled
DGS-3420-28SC:admin#
18-13 config authentication server failover
Description
This command is used to configure the authentication server failover function. When authentication
server fails, administrator can configure to:
* Use the local database to authenticate the client. The switch will resort to using the local database to
authenticate the client. If the client fails on local authentication, the client is regarded as un-
authenticated, otherwise, it authenticated.
* Pass authentication. The client is always regarded as authenticated. If guest VLAN is enabled,
clients will stay on the guest VLAN, otherwise, they will stay on the original VLAN.
* Block the client (default setting). The client is always regarded as un-authenticated.
Format
config authentication server failover [local | permit | block]
Parameters
local - Specify to use the local database to authenticate the client.
permit - Specify that the client is always regarded as authenticated.
block - Specify to block the client. This is the default setting.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.

D-Link xStack DGS-3420 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3420 Series
Category	Switch
Language	English