D-Link xStack DGS-3420 Series User Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
582
Command: show lldp
LLDP System Information
Chassis ID Subtype : MAC Address
Chassis ID : 00-11-22-33-44-55
System Name :
System Description : Gigabit Ethernet Switch
System Capabilities : Repeater, Bridge
LLDP Configurations
LLDP Status : Disabled
LLDP Forward Status : Disabled
Message TX Interval : 30
Message TX Hold Multiplier: 4
ReInit Delay : 2
TX Delay : 2
Notification Interval : 5
DGS-3420-28SC:admin#
51-5 config lldp forward_message
Description
This command is used to configure LLDP forwarding messages. When LLDP is disabled and LLDP
forward message is enabled, the received LLDPDU packet will be forwarded. The default state is
disabled.
Format
config lldp forward_message [enable | disable]
Parameters
enable - Enable LLDP forwarding messages.
disable - Disable LLDP forwarding messages.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable LLDP forwarding messages:
DGS-3420-28SC:admin#config lldp forward_message enable
Command: config lldp forward_message enable

D-Link xStack DGS-3420 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3420 Series
Category	Switch
Language	English