D-Link xStack DGS-3420 Series User Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
772
Example
To enable the PTP function globally:
DGS-3420-28SC:admin# enable ptp
Command: enable ptp
Success.
DGS-3420-28SC:admin#
71-2 disable ptp
Description
This command is used to disable the PTP function globally. When the PTP function is disabled, all
switch ports will forward the PTP packets according to the multicast filtering configuration.
Format
disable ptp
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable the PTP function globally:
DGS-3420-28SC:admin# disable ptp
Command: disable ptp
Success.
DGS-3420-28SC:admin#
71-3 config ptp mode
Description
This command is used to configure the PTP device type of the switch. The switch supports three PTP
device types, which the user can set globally.
A Boundry Clock:

D-Link xStack DGS-3420 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3420 Series
Category	Switch
Language	English