ARC452A23 SiUS181631EA
160 Remote Controller
5. ARC452A23
Reference Refer to the following pages for details.
★
1 POWERFUL operation ..........................................................................................................P.87
< ARC452A23 >
Signal transmitter
POWERFUL
1
button
• Starts POWERFUL operation.
Display (LCD)
ON/OFF button
Auto Indoor unit quiet Low
Middle low
MiddleMiddle highHigh
• Press this button once to
start operation.
Press once again to stop it.
• Displays the current settings.
(In this illustration, each section is
shown with all its displays on for the
purpose of explanation.)
FAN setting button
• In indoor unit quiet operation,
operation sound becomes weak.
(The airflow rate also decreases.)
• In DRY operation, the airflow rate
setting is not available.
• Selects the airflow rate setting
every time you press this button.
(R24601)
• Changes the temperature setting.
TEMPERATURE
adjustment buttons
: AUTO
: DRY
: COOL
: HEAT
: FAN
18 ~ 30 °C
(64 ~ 86 °F)
Not available
18 ~ 32 °C
(64 ~ 90 °F)
10 ~ 30 °C
(50 ~ 86 °F)
Not available
Receiver
• To use the remote controller, aim the
transmitter at the indoor unit. If there
is anything to block signals between
the unit and the remote controller,
such as a curtain, the unit will not
operate.
• Do not drop the remote controller.
Do not get it wet.
• The maximum distance for
communication is about 13 ft (4 m).
To Next Page
Loading...
Need help?
General