Danfoss ERC 102 User Manual

11
4.1.1 Unmounting
1. Disconnect the power cable and then the sensors.
2. Use a flat head screwdriver (ideally the one
supplied with the ERC 102 sample package)
and insert it carefully between the front frame
and the controller.
3. Gently twist the screwdriver to remove the
front frame. Do this in four places next to each
clip area.
5. Reach around the side to the clips.
ERC 102 Reference manual – 4 MOUNTING

Danfoss ERC 102 Specifications

General

Brand	Danfoss
Model	ERC 102
Category	Controller
Language	English