Danfoss ERC 102 User Manual

23
Password level 1 / PS1
Password Level 2 / PS2
Password Level 3 / PS3
These assign passwords to the three levels of access. The password is a three-digit
number. Access levels are Shop, Service and OEM. You may not therefore have ac-
cess to change all the passwords. Passwords are entered by using the up and down
arrow buttons.
Danfoss advises against using passwords which are easy to remember or enter, for
example 111, 222, 123 etc.
NOTE: When accessing the controller with 3 wrong password in a sequence ERC will
automatically block access for 15 minutes.
Danfoss ERC 102
Hold 3 sec: Menu
1 Click: Variable direct function, e.g.ECO/Night mode
1 Click: Variable direct function, e.g. light
Sub function: Up
1 Click: Temperature setpoint
Sub function: Down
Sub function: Back
Sub function: OK
ERC Front and Button Functionallity:
1 Click: Temperature setpoint
Danfoss ERC 102
Hold 3 sec: Menu
1 Click: Variable direct function, e.g.ECO/Night mode
1 Click: Variable direct function, e.g. light
Sub function: Up
1 Click: Temperature setpoint
Sub function: Down
Sub function: Back
Sub function: OK
ERC Front and Button Functionallity:
1 Click: Temperature setpoint
Danfoss ERC 102
Hold 3 sec: Menu
1 Click: Variable direct function, e.g.ECO/Night mode
1 Click: Variable direct function, e.g. light
Sub function: Up
1 Click: Temperature setpoint
Sub function: Down
Sub function: Back
Sub function: OK
ERC Front and Button Functionallity:
1 Click: Temperature setpoint
Danfoss ERC 102
Hold 3 sec: Menu
1 Click: Variable direct function, e.g.ECO/Night mode
1 Click: Variable direct function, e.g. light
Sub function: Up
1 Click: Temperature setpoint
Sub function: Down
Sub function: Back
Sub function: OK
ERC Front and Button Functionallity:
1 Click: Temperature setpoint
6.3 Set passwords
6.4 Set lighting function
Cabinet Light Source Control / CLC
This parameter can be set to one of these alternatives to control the light in the
cabinet:
Lig: button only – the light will only come on when the light button on the ERC
102 is pressed (toggle functionality).
Ldo: door (and button if defined) only
LEC: economy (and button if defined) only
Light off delay / Lod
Number of seconds the light will stay on after the
door has been closed.
ERC 102 Reference manual – 6 CONFIGURATION OF INPUTS AND OUTPUTS
Danfoss ERC 102
ERC Front and Button Functionallity:

Danfoss ERC 102 Specifications

General

Brand	Danfoss
Model	ERC 102
Category	Controller
Language	English