28
Auto Clear of Alarm / Error / ACA
If this parameter is set to nO:
The alarm status will not disappear automatically even if the condition which
caused the alarm is no longer valid or present.
If set to yES:
As soon as the condition which caused the alarm is no longer valid or present, the
alarm status will automatically change back to inactive. There will be no trace of
the alarm having occurred.
In general, Glass Door Merchandise applications will be set to yES and Commercial
Fridges and Freezers set to nO. For example, if the temperature goes too high for
a period there may be food safety considerations in a freezer containing food but
not in a fridge with cold drinks.
7.3 Compressor / CoP
ERC menu
code
Default Min Max Unit
Conv
Unit Scale Default Access
Shop Ser OEM
Compressor CoP
Min run time Crt 0 0 30 no min 1 -- RW RW
Min Stop time CSt 0 0 30 no min 1 -- RW RW
Max Off time Cot 0 0 480 no min 1 -- -- RW
Error run time Ert 0 0 60 no min 1 -- -- RW
Error stop time ESt 1 0 60 no min 1 -- -- RW
Minimum cut-in voltage uLi 0 0 270 no Vac 1 -- -- RW
Minimum cut-out voltage uLo 0 0 270 no Vac 1 -- -- RW
Maximum voltage uHi 270 0 270 no Vac 1 -- -- RW
Power On Delay Pod 300 0 300 no Sec 1 -- RW RW
Power Factor PFA 0 -90 90 no Degree 1 -- -- RW
Initial cut in iCi no no yes no 1 -- R- RW
Compressor door open delay Cdd 0 0 15 no min 1 -- RO RW
Danfoss ERC 102
Hold 3 sec: Menu
1 Click: Variable direct function, e.g.ECO/Night mode
1 Click: Variable direct function, e.g. light
Sub function: Up
1 Click: Temperature setpoint
Sub function: Down
Sub function: Back
Sub function: OK
ERC Front and Button Functionallity:
1 Click: Temperature setpoint
Danfoss ERC 102
Hold 3 sec: Menu
1 Click: Variable direct function, e.g.ECO/Night mode
1 Click: Variable direct function, e.g. light
Sub function: Up
1 Click: Temperature setpoint
Sub function: Down
Sub function: Back
Sub function: OK
ERC Front and Button Functionallity:
1 Click: Temperature setpoint
To Next Page
Loading...
Need help?
General
