Danfoss VLT AutomationDrive FC 301 Design Guide

4.3
Danfoss VLT
®
FlexConcept
®
Danfoss VLT
®
FlexConcept
®
is an energy efficient, flexible
and cost-efficient frequency converter solution, mainly for
conveyors. The concept consists of the VLT
®
OneGearDrive
®
driven by the VLT
®
AutomationDrive FC
302 or VLT
®
Decentral Drive FCD 302.
OneGearDrive is basically a permanent magnet motor with
a bevel gear. The bevel gear can be delivered with
different gear ratios.
130BB890.14
P1 P2 P3
Illustration 4.8 OneGearDrive
The OneGearDrive can be driven by VLT
®
AutomationDrive
FC 302 and VLT
®
Decentral Drive FCD 302 in the folllowing
power sizes dependent on demands of the actual
application:
•
0.75 kW
•
1.1 kW
•
1.5 kW
•
2.2 kW
•
3.0 kW
When [1] PM, non salient SPM has been selected in in either
FC 302 or FCD 302, the OneGearDrive can be selected in
1-11 Motor Model, and the recommended parameters are
set automatically.
For further information, refer to the VLT
®
AutomationDrive
FC 301/FC 302 Programming Guide, the VLT
®
OneGearDrive
Selection Guide, and www.danfoss.com/BusinessAreas/Drives-
Solutions/VLTFlexConcept/
Product Features
VLT
®
AutomationDrive FC 301/FC 302 Design Guide, 0.25-75 kW
44 MG33BF02 - Rev. 2013-12-20
44

Danfoss VLT AutomationDrive FC 301 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 301
Category	DC Drives
Language	English