Danfoss VLT AutomationDrive FC 301 Design Guide

7 How to Order
7.1 Drive Configurator
F C - P T
130BB836.10
X S A B CX X X X
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 302221 23 272524 26 28 29 31 373635343332 38 39
X D
Illustration 7.1 Type Code Example
Configure the right frequency converter for the right
application from the Internet based Drive Configurator and
generate the type code string. The Drive Configurator
automatically generates an 8-digit sales number to be
delivered to the local sales office.
Furthermore, it is possible to establish a project list with
several products and send it to a Danfoss sales represen-
tative.
The Drive Configurator can be found on the global
Internet site: www.danfoss.com/drives.
7.1.1 Type Code
An example of the type code is:
FC-302PK75T5E20H1BGCXXXSXXXXA0BXCXXXXD0
The meaning of the characters in the string can be found
in Table 7.1 and Table 7.2. In the example above, a Profibus
DP V1 and a 24 V back-up option is built-in.
Description
Pos Possible choices
Product group 1-3 FC 30x
Drive series 4-6 301: FC 301
302: FC 302
Power rating 8-10 0.25-75 kW
Phases 11 Three phases (T)
Mains voltage 11-
12
T2: 200-240 V
T4: 380-480 V
T5: 380-500 V
T6: 525-600 V
T7: 525-690 V
Enclosure 13-
15
E20: IP20
E55: IP 55/NEMA Type 12
P20: IP20 (with back plate)
P21: IP21/ NEMA Type 1 (with back
plate)
P55: IP55/ NEMA Type 12 (with back
plate)
Z20: IP 20
1)
E66: IP 66
Description Pos Possible choices
RFI filter 16-
17
Hx: No EMC filters built in the frequency
converter (600 V units only)
H1: Integrated EMC filter. Fulfil EN
55011 Class A1/B and EN/IEC 61800-3
Category 1/2
H2: No additional EMC filter. Fulfil EN
55011 Class A2 and EN/IEC 61800-3
Category 3
H3:
H3 - Integrated EMC filter. Fulfil EN
55011 class A1/B and EN/IEC 61800-3
Category 1/2 (Enclosure type A1 only)
1)
H4: Integrated EMC filter. Fulfil EN
55011 class A1 and EN/IEC 61800-3
Category 2
H5: Marine versions. Fulfill same
emissions levels as H2 versions
Brake 18 B: Brake chopper included
X: No brake chopper included
T: Safe Stop No brake
1)
U: Safe stop brake chopper
1)
Display 19 G: Graphical Local Control Panel (LCP)
N: Numerical Local Control Panel (LCP)
X: No Local Control Panel
Coating PCB 20 C: Coated PCB
R: Ruggedised
X: No coated PCB
Mains option 21 X: No mains option
1: Mains disconnect
3: Mains disconnect and Fuse
2)
5: Mains disconnect, Fuse and Load
sharing
2, 3)
7: Fuse
2)
8: Mains disconnect and Load sharing
3)
A: Fuse and Load sharing
2, 3)
D: Load sharing
3)
Adaptation 22 X: Standard cable entries
O: European metric thread in cable
entries (A4, A5, B1, B2, C1, C2 only)
S: Imperial cable entries (A5, B1, B2, C1
and C2 only)
Adaptation 23 X: No adaptation
How to Order
VLT
®
AutomationDrive FC 301/FC 302 Design Guide, 0.25-75 kW
82 MG33BF02 - Rev. 2013-12-20
77

Danfoss VLT AutomationDrive FC 301 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 301
Category	DC Drives
Language	English