Danfoss VLT AutomationDrive FC 301 Design Guide

Type Designation P11K P15K P18K P22K P30K
High/Normal Overload
1)
HO NO HO NO HO NO HO NO HO NO
Typical Shaft Output [kW] 11 15 15 18.5 18.5 22 22 30 30 37
Enclosure IP20 B3 B3 B4 B4 B4
Enclosure IP21, IP55, IP66 B1 B1 B2 B2 C1
Output current
Continuous (525-550 V) [A] 19 23 23 28 28 36 36 43 43 54
Intermittent (525-550 V) [A] 30 25 37 31 45 40 58 47 65 59
Continuous (551-600 V) [A] 18 22 22 27 27 34 34 41 41 52
Intermittent (551-600 V) [A] 29 24 35 30 43 37 54 45 62 57
Continuous kVA (550 V) [kVA] 18.1 21.9 21.9 26.7 26.7 34.3 34.3 41.0 41.0 51.4
Continuous kVA (575 V) [kVA] 17.9 21.9 21.9 26.9 26.9 33.9 33.9 40.8 40.8 51.8
Max. input current
Continuous at 550 V [A] 17.2 20.9 20.9 25.4 25.4 32.7 32.7 39 39 49
Intermittent at 550 V [A] 28 23 33 28 41 36 52 43 59 54
Continuous at 575 V [A] 16 20 20 24 24 31 31 37 37 47
Intermittent at 575 V [A] 26 22 32 27 39 34 50 41 56 52
Additional specifications
IP20 max. cable cross-section
4)
for
mains, brake, motor and load
sharing [mm
2
] ([AWG])
10, 10,- (8, 8,-) 10, 10,- (8, 8,-) 35,-,-(2,-,-) 35,-,-(2,-,-) 35,-,-(2,-,-)
IP21, IP55, IP66 max. cable cross-
section
4)
for mains, brake and load
sharing [mm
2
] ([AWG])
16, 10, 10 (6, 8, 8) 16, 10, 10 (6, 8, 8) 35,-,-(2,-,-) 35,-,-(2,-,-) 50,-,- (1,-,-)
IP21, IP55, IP66 max. cable cross-
section
4)
for motor [mm
2
] ([AWG])
10, 10,- (8, 8,-) 10, 10,- (8, 8,-) 35, 25, 25 (2, 4, 4) 35, 25, 25 (2, 4, 4) 50,-,- (1,-,-)
Max. cable cross-section
4)
for
Disconnect [mm
2
] ([AWG])
16, 10, 10
(6, 8, 8)
50, 35, 35
(1, 2, 2)
Estimated power loss
at rated max. load [W]
3)
220 300 300 370 370 440 440 600 600 740
Efficiency
2)
0.98 0.98 0.98 0.98 0.98
Table 6.8 Mains Supply 525-600 V (FC 302 only), P11K-P30K
Product Specifications
VLT
®
AutomationDrive FC 301/FC 302 Design Guide, 0.25-75 kW
64 MG33BF02 - Rev. 2013-12-20
66

Danfoss VLT AutomationDrive FC 301 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 301
Category	DC Drives
Language	English