Danfoss VLT MCD 600 Installation Guide

6.4.1.3 Parameter Group 30-** Pump Input Configuration 18
6.4.1.4 Parameter Group 32-** Pressure Protection 18
6.4.1.5 Parameter Group 36-** Pump Trip Action 19
6.5 Pressure Control 20
6.5.1 Configuring Pressure Control 20
6.5.2 Operation 20
6.5.2.1 Level Control Operation 21
6.5.2.2 Pressure-based Operation 22
6.5.2.3 Parameter Group 30-** Pump Input Configuration 23
6.5.2.4 Parameter Group 33-** Pressure Control 23
6.5.2.5 Parameter Group 36-** Pump Trip Action 24
6.6 Depth Protection 24
6.6.1 Operation 25
6.6.1.1 Using an Analog 4–20 mA Sensor 25
6.6.1.2 Using a Switch Sensor 25
6.6.1.3 Parameter Group 30-** Pump Input Configuration 26
6.6.1.4 Parameter Group 34-** Depth Protection 26
6.6.1.5 Parameter Group 36-** Pump Trip Action 27
6.7 Thermal Protection 27
6.7.1 Parameter Group 35-** Thermal Protection 28
6.7.2 Parameter Group 36-** Pump Trip Action 28
7 Trip Messages 29
7.9 Pressure Sensor 31
8 Specifications 33
8.1 Connections 33
8.2 Certification 33
Contents
Installation Guide | Pumping Smart Card
AN279052730268en-000102 / 175R11834 | Danfoss A/S © 2018.10

Danfoss VLT MCD 600 Specifications

General

Brand	Danfoss
Model	VLT MCD 600
Category	Controller
Language	English