Danfoss VLT MCD 600 Installation Guide

Contents
1 Safety 5
1.1 Disclaimer 5
1.2 Warnings 5
2 Overview 6
2.1 Features of the Pumping Smart Card 6
2.1.1 Monitoring 6
2.1.2 Protection 6
2.1.3 Control 6
3 Setting up the Smart Card 7
3.1 Set-up Procedure 7
4 Installation 8
4.1 Installing the Expansion Card 8
4.2 Compatible Input Devices 8
4.3 Active and Passive 4–20 mA Input Devices 8
4.4 Minimizing Noise 9
4.5 Inputs 9
5 Operation 11
5.1 Monitoring 11
5.2 Protection and Monitoring 11
5.3 Protecting, Monitoring, and Controlling the Soft Starter 11
6 Configuration 12
6.1 Parameter Configuration 12
6.2 Off-line Configuration 12
6.3 Flow Protection 12
6.3.1 Operation 12
6.3.1.1 Using an Analog 4–20 mA Sensor 13
6.3.1.2 Using a Switch Sensor 13
6.3.1.3 Using a Pulse Sensor 13
6.3.2 Parameter Group 30-** Pump Input Configuration 14
6.3.3 Parameter Group 31-** Flow Protection 15
6.3.4 Parameter Group 36-** Pump Trip Action 15
6.4 Pressure Protection 16
6.4.1 Operation 17
6.4.1.1 Using an Analog 4–20 mA Sensor 17
6.4.1.2 Using a Switch Sensor 17
Contents
Installation Guide | Pumping Smart Card
AN279052730268en-000102 / 175R1183 | 3Danfoss A/S © 2018.10

Danfoss VLT MCD 600 Specifications

General

Brand	Danfoss
Model	VLT MCD 600
Category	Controller
Language	English