Danfoss VLT Midi Drive FC 280 Programming Guide

4.17 Parameters: 18-** Data Readouts 2
18-90 Process PID Error
Range: Function:
0 %* [-200 - 200 %] Gives the present error value used by the
process PID controller.
18-91 Process PID Output
Range: Function:
0 %* [-200 - 200 %] Gives the present raw output value from
the process PID controller.
18-92 Process PID Clamped Output
Range: Function:
0 %* [-200 - 200 %] Gives the present output value from the
process PID controller after the clamp
limits have been observed.
18-93 Process PID Gain Scaled Output
Range: Function:
0 %* [-200 -
200 %]
Gives the present output value from the
process PID controller after the clamp
limits have been observed and the
resulting value has been gain scaled.
Parameter Descriptions
VLT
®
Midi Drive FC 280
104 Danfoss A/S © 12/2015 All rights reserved. MG07C102
44

Danfoss VLT Midi Drive FC 280 Specifications

General

Brand	Danfoss
Model	VLT Midi Drive FC 280
Category	DC Drives
Language	English