5.2 Parameter Lists
5.2.1 0-** Operation and Display
Param
eter #
Parameter description Default value 4 set-up Change during
operation
Conversion
index
Type
0-0* Basic Settings
0-01 Language [0] English 1 set-up TRUE - Uint8
0-03 Regional Settings [0] International 1 set-up FALSE - Uint8
0-04 Operating State at Power-up [0] Resume All set-ups TRUE - Uint8
0-06 GridType ExpressionLimit 1 set-up FALSE - Uint8
0-07 Auto DC Braking [1] On 1 set-up FALSE - Uint8
0-1* Set-up Operations
0-10 Active Set-up [1] Set-up 1 1 set-up TRUE - Uint8
0-11 Programming Set-up [9] Active Set-up 1 set-up TRUE - Uint8
0-12 Link Setups [20] Linked All set-ups FALSE - Uint8
0-14 Readout: Edit Set-ups / Channel 0 N/A All set-ups TRUE 0 Int32
0-16 Application Selection [0] None 1 set-up FALSE - Uint8
0-2* LCP Display
0-20 Display Line 1.1 Small 1602 All set-ups TRUE - Uint16
0-21 Display Line 1.2 Small 1614 All set-ups TRUE - Uint16
0-22 Display Line 1.3 Small 1610 All set-ups TRUE - Uint16
0-23 Display Line 2 Large 1613 All set-ups TRUE - Uint16
0-24 Display Line 3 Large 1502 All set-ups TRUE - Uint16
0-3* LCP Custom Readout
0-30 Custom Readout Unit [1] % 1 set-up TRUE - Uint8
0-31 Custom Readout Min Value
0 CustomRea-
doutUnit 1 set-up TRUE -2 Int32
0-32 Custom Readout Max Value
100 CustomRea-
doutUnit 1 set-up TRUE -2 Int32
0-37 Display Text 1 [] 1 set-up TRUE 0 VisStr[21]
0-38 Display Text 2 [] 1 set-up TRUE 0 VisStr[26]
0-39 Display Text 3 [] 1 set-up TRUE 0 VisStr[26]
0-4* LCP Keypad
0-40 [Hand on] Key on LCP [1] Enabled All set-ups TRUE - Uint8
0-42 [Auto on] Key on LCP [1] Enabled All set-ups TRUE - Uint8
0-44 [O/Reset] Key on LCP [1] Enabled All set-ups TRUE - Uint8
0-5* Copy/Save
0-50 LCP Copy [0] No copy 1 set-up FALSE - Uint8
0-51 Set-up Copy [0] No copy 1 set-up FALSE - Uint8
0-6* Password
0-60 Main Menu Password 0 N/A 1 set-up TRUE 0 Uint16
Parameter Lists
VLT
®
Midi Drive FC 280
116 Danfoss A/S © 12/2015 All rights reserved. MG07C102
55
To Next Page
Loading...
Need help?
General