3 Mechanical Installation
3.1 Unpacking
3.1.1 Items Supplied
Items supplied may vary according to product congu-
ration.
•
Make sure that the items supplied and the
information on the nameplate correspond to the
order conrmation.
•
Check the packaging and the frequency converter
visually for damage caused by inappropriate
handling during shipment. File any claim for
damage with the carrier. Retain damaged parts
for clarication.
130BE616.14
VLT
MADE IN
DENMARK
T/C: FC-280PK37T4E20H1BXCXXXSXXXXAX
0.37kW 0.5HP
IN: 3x380-480V 50/60Hz, 1.2/1.0A
OUT: 3x0-Vin 0-500Hz, 1.2/1.1A
IP20
P/N: 134U2184 S/N: 000000G000
Midi Drive
www.danfoss.com
CAUTION / ATTENTION:
WARNING / AVERTISSEMENT:
See manual for special condition/mains fuse
Voir manual de conditions speciales/fusibles
Enclosure: See manual
5AF3 E358502 IND.CONT.EQ.
Stored charge, wait 4 min.
Charge r
é
siduelle, attendez 4 min.
21
1
2
4
3
5
11
20
19
18
16
15
14
13
10
8
9
6
17
R
US LISTED
www.tuv.com
ID 0600000000
Danfoss A/S, 6430 Nordborg, Denmark
12
7
1 Product logo
2 Product name
3 Disposal
4 CE mark
5 Serial number
6 TÜV logo
7 UkrSEPRO logo
8 Barcode
9 Country of origin
10 Reference to enclosure type
11 EAC logo
12 RCM logo
13 UL reference
14 Warning specications
15 UL logo
16 IP rating
17
Output voltage, frequency, and current (at low/high
voltages)
18
Input voltage, frequency, and current (at low/high
voltages)
19 Power rating
20 Ordering number
21 Type code
Illustration 3.1 Product Nameplate (Example)
NOTICE
Do not remove the nameplate from the frequency
converter (loss of warranty).
For more information of the type code, refer to the
chapter Type Code in the VLT
®
Midi Drive FC 280 Design
Guide.
Mechanical Installation Operating Guide
MG07A402 Danfoss A/S © 10/2017 All rights reserved. 9
3 3