Danfoss VLT Midi Drive FC 280 User Manual

1.5 Approvals and Certications
089
For compliance with the European Agreement concerning
International Carriage of Dangerous Goods by Inland
Waterways (ADN), refer to the chapter ADN-compliant Instal-
lation in the VLT
®
Midi Drive FC 280 Design Guide.
The frequency converter complies with UL 508C thermal
memory retention requirements. For more information,
refer to the chapter Motor Thermal Protection in the VLT
®
Midi Drive FC 280 Design Guide.
Applied standards and compliance for STO
Using STO on terminals 37 and 38 requires fulllment of all
provisions for safety including relevant laws, regulations,
and guidelines. The integrated STO function complies with
the following standards:
•
IEC/EN 61508:2010, SIL2
•
IEC/EN 61800-5-2:2007, SIL2
•
IEC/EN 62061:2015, SILCL of SIL2
•
EN ISO 13849-1:2015, Category 3 PL d
1.6
Disposal
Do not dispose of equipment containing
electrical components together with
domestic waste.
Collect it separately in accordance with
local and currently valid legislation.
Introduction
VLT
®
Midi Drive FC 280
6 Danfoss A/S © 10/2017 All rights reserved. MG07A402
11

Danfoss VLT Midi Drive FC 280 Specifications

General

Brand	Danfoss
Model	VLT Midi Drive FC 280
Category	DC Drives
Language	English