Datalogic QuickScan Lite QW2400 User Manual

Enter/Exit Programming Mode China Sensible Code
208 QuickScan™ Lite QW2400
China Sensible Code Set Length 1
Specifies one of the bar code lengths for China Sensible Code Length Control
on page 207. Length 1 is the minimum l
abel length if in Variable Length Mode,
or the first fixed length if in Fixed Leng
th Mode. Characters can be set from
0001 to 7,827 characters in increments of 0001 (pad with zeroes).
See page 257 for detailed instructions on setting this feature.
Select China Sensible Code Length 1 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at
left followe
d by the digits from the Alphanumeric char-
acters in
Appendix D, Keypad representing your
desired character(s). End by scanning the ENTER/E
XIT
bar code again.
Make a mistake? Scan the CANCEL bar code to abort and
not save
the entry string. You can then start again at the
beginning.
CANCEL
$CCSL1
~
0001 = Length 1 is 1 Character
DEFAULT

Datalogic QuickScan Lite QW2400 Specifications

General

Brand	Datalogic
Model	QuickScan Lite QW2400
Category	Barcode Reader
Language	English