Datalogic QuickScan Lite QW2400 User Manual

Enter/Exit Programming Mode Label ID
72 QuickScan™ Lite QW2400
Label ID
A Label ID is a customizable code of up to three ASCII characters (each can be
one of hex 0x01-0xFF), used to identify a bar code (symbology) type. It can be
appended previous to or following the transmitted bar code data depending
upon how this option is enabled. This feature provides options for configuring
custom Label IDs as a pre-loaded set (see "Label ID: Pre-loaded Sets" on
page 72) or individually per symbology (see "Label ID: Set Individually Per Sym-
bology" on
page 73). If you wish to program the scanner to always include an
industry standard label iden
tifier for ALL symbology types, see the previous
feature "Global AIM ID" on
page 71.
Label ID: Pre-loaded Sets
The scanner supports two pre-loaded sets of Label IDs, the USA set and the EU
set. See "Label ID: Pre-loaded Sets" on
page 248 for more information concern-
ing the pre-loaded sets that are provided.
CAUTION
When changing from one Label ID set
to another, all other scanner
configuration settings, including the host interface type, will be erased
and set to the factory defaults. Any custom configuration or custom
defaults will be lost.
$AE
Label ID Pre-loaded Set = USA Set
$Ae
Label ID Pre-loaded Set = EU Set
DEFAULT

Datalogic QuickScan Lite QW2400 Specifications

General

Brand	Datalogic
Model	QuickScan Lite QW2400
Category	Barcode Reader
Language	English