● Phillips screwdriver #0
● Phillips screwdriver #1
● Plastic scribe
Screw list
NOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE: Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when
replacing a component.
NOTE: Screw color may vary with the configuration ordered.
Table 24. Screw list
Component Screw type Quantity
Side cover #6-32 (Captive screws)
1
System board M3x5
M3x4
5
3
Wireless card M2x3.5 1
M.2 2230/2280 solid-state drive M2x3.5 1
Internal antenna M3x3
3
I/O module M3x3
or
M2x5, cross type
2
Type-C module M3x3 2
Major components of OptiPlex Micro Plus 7010
The following image shows the major components of OptiPlex Micro Plus 7010.
Working inside your computer
27
To Next Page
Loading...
Need help?
General