280 Faxing
Sending a Fax
You can fax data from your printer.
Sending a Fax Automatically
1
Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
For details about loading a document, see "Making Copies From the ADF" on page 235 or "Making Copies From
the Document Glass" on page 233.
2
Press the
(Fax)
button.
3
Enter the fax number of the remote fax machine using the numeric keypad, and then press the (
Set
) button.
You can also use speed dial or group dial numbers to specify the fax number. For more information, see "Automatic
Dialing" on page 289.
NOTE: To call up the fax number the printer dialed last, press the (Redial/Pause) button, and then press the (Set)
button.
4
Configure the fax settings as necessary.
Settings such as resolution and contrast are available. To configure these settings, press the button until
Preferences
is highlighted, and then press the (
Set
) button. For details about setting items, see "Setting
Fax Options" on page 281.
5
Ensure that
Start Fax
is highlighted, and then press the
(Start)
button.
When you are using the document glass, the display prompts you for another page. Press the button to select
Yes
to add more documents or to select
No
to begin sending the fax immediately, and then press the
(Set)
button.
NOTE: Press the (Cancel) button to cancel the fax job while sending the fax.
Sending a Fax Manually
1
Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
For details about loading a document, see "Making Copies From the ADF" on page 235 or "Making Copies From
the Document Glass" on page 233.
2
Press the
(Fax)
button.
3
Enter the fax number of the remote fax machine using the numeric keypad, and then press the (
Set
) button.
4
Press the button until
Preferences
is highlighted, and then press the (
Set
) button.
5
Configure the fax settings as necessary.
Settings such as resolution and contrast are available. For details about setting items, see "Setting Fax Options" on
page 281.
6
Press the button until
OnHook
is highlighted, and then press the (
Set
) button.
7
Press the button until
On
is highlighted, and then press the (
Set
) button.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
