Completed Jobs
Purpose:
To check the completed jobs. Up to the last 20 jobs are displayed. Click the Refresh button to update the screen.
Va lu e s:
ID Displays the job ID.
Job Name Displays the file name of the completed job.
Owner Displays the name of the job owner.
Host Name Displays the name of the host computer.
Output Result Displays the status of the completed job.
Impression Number Displays the total number of pages for the job.
No. of Sheets Displays the total number of sheets for the job.
Host I/F Displays the status of the host interface.
Job Submitted Time Displays the date when the job was submitted.
Printer Settings
Use the Printer Settings menu to display the Printer Settings Report, Printer Settings, and Printer Maintenance
tabs and to configure the printer settings.
The following tabbed pages are displayed at the top of the right frame.
Printer Settings Report
The Printer Settings Report tab includes the Menu Settings and Reports pages.
Menu Settings
Purpose:
To display the current settings of the printer menus.
Va lu e s:
System Settings Power Saver Time - Sleep Displays the time taken by the printer to enter Sleep mode after it
finishes a job.
Power Saver Time - Deep Displays the time taken by the printer to enter Deep Sleep mode after
Sleep it has entered Sleep mode.
Power Saver Time - Power
Off Timer
*1
Displays the time taken by the printer to be turned off after it has
entered Deep Sleep mode.
mm / inch Displays the measurement unit that is used on the LCD panel.
Control Panel Tone Displays the volume of the tone that is emitted when the operator
panel input is correct. Off indicates that the tone is disabled.
Invalid Key Tone Displays the volume of the tone that is emitted when the operator
panel input is incorrect. Off indicates that the tone is disabled.
Machine Ready Tone Displays the volume of the tone that is emitted when the printer
becomes ready. Off indicates that the tone is disabled.
Job Completed Tone Displays the volume of the tone that is emitted when a print job is
complete. Off indicates that the tone is disabled.
Fault Tone Displays the volume of the tone that is emitted when a job ends
abnormally. Off indicates that the tone is disabled.
Dell™ Printer Configuration Web Tool 110
To Next Page
Loading...
Need help?
General
Weight and Dimensions
