Need help?Do you have a question about the Dell Force10 Z9000 and is the answer not in the manual?
General| Switching Capacity | 2.56 Tbps |
|---|---|
| Power Supply | Dual, hot-swappable |
| MTBF | 200, 000 hours |
| Ports | 32 x 40GbE QSFP+ |
| Cooling | Front-to-back airflow |
| Form Factor | Fixed |
| Jumbo Frame Support | Up to 9216 bytes |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -40°C to 70°C |
| Humidity | 10% to 90% (non-condensing) |
| MAC Address Table Size | 128K |
| Dimensions (HxWxD) | 3.45 in x 17.32 in x 20.0 in |
Outlines requirements for selecting a suitable installation site for the Z9000.
Details the process and requirements for mounting the Z9000 in a standard equipment rack.
Explains the essential grounding procedures for the Z9000 system's safety.
Covers power connection requirements and considerations for the Z9000 system.
Step-by-step guide for installing the Z9000 system into a rack or cabinet. Includes attaching mounting brackets and placing the system.
Details the process of connecting the ground cable to the Z9000 for safety.
Guide on installing QSFP+ optical modules into the Z9000 ports. Includes splitting ports.
Procedure for installing the Solid State Drive (SSD) into the Z9000.
Steps for connecting power and turning on the Z9000 system. Covers power-up sequence and AC/DC power.
Procedures for installing new AC/DC power supplies and replacing existing ones.
Steps for installing a fan module into the Z9000 system.
Procedure for replacing a faulty fan module in the Z9000 system.
Lists the electrical specifications for AC power input to the Z9000.
How to contact Dell Force10 TAC for support, including required information.
Steps to follow to request replacement hardware for the Z9000.
To Next Page
