Dell Force10 Z9000 User Manual

12 | The Z9000 System
www.dell.com | support.dell.com
Ports
• External serial RS-232 port (RJ45 type)
• Remote management port
• 32-port 40G QSFP+ ports
• USB-A port
• USB-B port
• SSD drive
System Status
You can view the Z9000 status information in several ways, including Light Emitting Diodes (LEDs) and
boot menu options. You can also view status information through the Command Line Interface (CLI)
show commands and with Simple Network Management Protocol (SNMP) traps. For more information
about these options, refer to the FTOS Command Line Reference Guide for the Z9000 System and the
FTOS Configuration Guide for the Z9000 System.
LED Displays
As shown in the following figure, the Z9000 includes LED displays on the I/O side of the chassis. When
the Z9000 powers up or reloads, the PSU LED is solid yellow.
Figure 2-3. System LEDs
SYS
ALM
PSU0
PSU1
LOC
Reset

Dell Force10 Z9000 Specifications

General

Brand	Dell
Model	Force10 Z9000
Category	Switch
Language	English