52 Adding Parts
www.dell.com | support.dell.com
Replacing the Palm Rests
1
Save and close any open files, exit any open programs, and shut down
the computer (see page 18).
2
If the computer is connected (docked) to an advanced port replicator
(APR), undock it (see page 59).
3
Keep the display open and tilt the computer back so that you can
access the bottom of the computer.
4
Slide and hold the latch release on the left side, and remove any device
installed in the modular bay.
5
Slide and hold the latch release on the right side, and remove any
battery installed in the battery bay.
6
Locate the orange palm rest removal buttons. Place your thumbs on
the button and gently push to release the palm rests.
ottom o
computer
To Next Page
Loading...
Need help?
General