Appendix 189
System Setup Options
NOTE: Depending on your computer and installed devices, the items listed in this
section may not appear, or may not appear exactly as listed.
System Info
BIOS Info Shows the BIOS version number and date information.
Service Tag Shows the service tag of the computer.
CPU Info Identifies whether the computer’s processor supports
Hyper-Threading and lists the processor bus speed,
processor ID, clock speed, and L2 cache.
Memory Info Indicates amount of installed memory, memory speed,
channel mode (dual or single), and type of memory installed.
Standard CMOS Features
Date/Time Displays current date and time settings. Date (mm:dd:yy)
SATA Info Displays the SATA drives integrated in the system
(SATA-0; SATA-1; SATA-2; SATA-3; SATA-4; SATA-5)
SATA HDD Auto-
Detection
Auto detects the SATA connector to which the hard drive
is attached.
Capacity The combined installed capacity of all the SATA devices.
Drive A None; 1.44M, 3.5 in (1.44M, 3.5 inches by default)
Halt On All Error; All, But Keyboard (All, But Keyboard by default)
Advanced BIOS Features
CPU Feature
• Limit CPUID Value
—
Enabled; Disabled (Disabled by
default)
• Execute Disable Bit
—
Enabled; Disabled (Enabled by
default)
• Virtualization Technology
—
Enabled; Disabled (Enabled
by default)
• Core Multi-Processing
—
Enabled; Disabled (Enabled by
default)
Boot Up NumLock Off; On (On by default)
book.book Page 189 Monday, October 6, 2008 11:28 AM
To Next Page
Loading...
Need help?
General