Mini Tower Computer Parts 195
4
Connect the cables to the system board.
5
Replace the computer cover.
6
Turn on power to the computer.
Removing a Speaker
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions located in the Product Information Guide.
NOTICE: To prevent static damage to components inside your computer, discharge
static electricity from your body before you touch any of your computer’s electronic
components. You can do so by touching an unpainted metal surface on the
computer chassis.
1
Follow the procedures in "Before You Begin" on page 143.
2
Remove the cover of your computer (see "Removing the Computer Cover"
on page 147).
To Next Page
Loading...
Need help?
General