180 Mini Tower Computer Parts
Floppy Drive
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
CAUTION: To guard against electrical shock, laceration by moving fan blades, or
other unexpected injuries, always unplug your computer from the electrical outlet
before removing the cover.
NOTE: If you are adding a floppy drive, see "Installing a Floppy Drive" on page 182.
Removing a Floppy Drive
1
Follow the procedures in "Before You Begin" on page 143.
2
Remove the computer cover (see "Removing the Computer Cover" on
page 147).
3
Remove the bezel (see "Removing the Bezel" on page 165).
4
Disconnect the power and data cables from the back of the floppy drive.
5
Disconnect the data cable from the system board.
6
Slide the drive release latch downward and hold it in place. Without
releasing the latch, slide the floppy drive out of the computer.
To Next Page
Loading...
Need help?
General