88 System Setup
Boot Sequence
This feature allows you to change the boot sequence for devices.
Option Settings
• USB Device —
The computer attempts to boot from the USB device. If
no operating system is present, the computer generates an error message.
POST Behavior
Fast Boot
(On default)
When enabled, this feature reduces computer startup
time by bypassing some compatibility steps.
•
Off
- No steps are skipped during computer startup.
•
On
- The system starts more quickly.
Numlock Key
(On default)
Determines the functionality of the numeric keys on the
right side of your keyboard.
•
Off
- The right keypad keys function as arrows.
•
On
- The right keypad keys function as numbers.
POST Hotkeys
(Setup & Boot
Menu default)
Determines whether the sign-on screen displays a
message stating the keystroke sequence that is required
to enter the Setup program or the Quickboot feature.
•
Setup & Boot Menu
displays both messages
(F2=Setup and F12=Boot Menu).
•
Setup
displays the setup message only (F2=Setup).
•
Boot Menu
displays the Quick Boot message only
(F12=Boot Menu).
•
None
displays no message.
Keyboard Errors
(Report default)
When set to Report (enabled) and an error is detected
during POST, the BIOS will display the error message
and prompt you to press <F1> to continue or press
<F2> to enter system setup.
When set to Do Not Report (disabled) and an error is
detected during POST, the BIOS will display the error
message and continue booting the system.
To Next Page
Loading...
Need help?
General