Power Cable Connectors
Connecting and Disconnecting Drive Cables
When removing a cable with a pull-tab, grasp the colored pull-tab and pull until the connector detaches.
When connecting and disconnecting a cable without a pull tab, hold the cable by the black connector at each end.
Drive Inserts
Your computer will come with a plastic insert with shoulder screws and a metal insert.
Removing Drive Inserts
If you are installing a new drive:
1. Follow the procedures in Working on Your Computer.
2. Remove the computer cover (see Removing the Computer Cover).
3. Lift the drive release latch.
4. Slide the metal bracket toward the back of the computer and lift up.
To Next Page
Loading...
Need help?
General