Removing the speakers
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Prerequisites
Remove the base cover.
Procedure
1 Disconnect the speaker cable from the system board.
2 Lift the left speaker o the palm-rest assembly.
3 Remove the speaker cable from the routing guides on the battery.
4 Peel o the tape that secures the speaker cable to the palm-rest assembly.
5 Lift the right speaker o the palm-rest assembly.
13
Removing the speakers 23