Removing the status-light board
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the base cover.
2 Remove the battery.
Procedure
NOTE: The status-light board includes an LED indicator for power and battery-status light/hard-drive activity light.
1 Open the latch and disconnect the status-light board cable from the system board.
2 Press on release tab and lift the status-light board from the slot on the palm-rest assembly.
3 Slide the status-light board cable under the speaker cable and lift the status-light board o the palm-rest assembly.
27
46 Removing the status-light board
To Next Page
Loading...
Need help?
General
