Dell P86F User Manual

Next steps
1. Replace the battery
2. Replace the
base cover
3. Replace the SD memory card
4. Follow the procedure in after working inside your computer
Memory modules
Removing the memory module
Prerequisites
1. Follow the procedure in before working inside your computer
2. Remove the SD memory card
3. Remove the base cover
4. Disconnect the battery cable.
Steps
1. Pry the clips securing the memory module until the memory module pops-up [1].
2. Remove the memory module from the memory module slot [2].
Installing the memory module
Steps
1. Align the notch on the memory module with the tab on the memory-module slot.
2. Slide the memory module firmly into the slot at an angle [1].
3. Press the memory module down until the clips secure it [2].
Removing and installing components 35

Dell P86F Specifications

General

Brand	Dell
Model	P86F
Category	Laptop
Language	English