Next steps
1. Replace the display bezel
2. Replace the
display assembly
3. Replace the WLAN
4. Replace the battery
5. Replace the base cover
6. Replace the SD memory card
7. Follow the procedure in after working inside your computer
Display hinges
Removing the display hinges
Prerequisites
1. Follow the procedure in before working inside your computer
2. Remove the SD memory card
3. Remove the base cover
4. Remove the battery
5. Remove the
WLAN
6. Remove the display assembly
7. Remove the display bezel
8. Remove the display panel
Steps
1. Remove the six (M2.5x2.5) screws and two (M2x2.5) screws that secure the hinges to the display back-cover [1].
2. Lift the hinges and brackets off the display back-cover [2].
Removing and installing components 97
To Next Page
Loading...
Need help?
General
