Name: Dell PE R720XD
Brand: Dell
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Menu Item Description

System BIOS Version Displays the BIOS version installed on the system.

System Service Tag Displays the system Service Tag.

System Manufacturer Displays the name of system manufacturer.

System Manufacturer Contact Information Displays the contact information of the system manufacturer.

Memory Settings Screen

Menu Item Description

System Memory Size Displays the amount of memory installed in the system.

System Memory Type Displays the type of memory installed in the system.

System Memory Speed Displays the system memory speed.

System Memory Voltage Displays the system memory voltage.

Video Memory Displays the amount of video memory.

System Memory Testing Specifies whether system memory tests are run during system boot. Options are Enabled

and Disabled. By default, the System Memory Testing option is set to Disabled.

Memory Operating Mode Specifies the memory operating mode. The options available depending on the memory

configuration of your system are Optimizer Mode, Advanced ECC Mode, Mirror Mode,

Spare Mode, and Spare with Advanced ECC Mode. By default, the Memory Operating Mode

option is set to Optimizer Mode.

NOTE: The Memory Operating Mode can have different defaults and available options

based on the memory configuration.

Node Interleaving If this field is Enabled, memory interleaving is supported if a symmetric memory

configuration is installed. If Disabled, the system supports Non-Uniform Memory

architecture (NUMA) (asymmetric) memory configurations. By default, Node Interleaving

option is set to Disabled.

Serial Debug Output By default, it is set to disabled.

Processor Settings Screen

Menu Item Description

Logical Processor Allows you to enable or disable logical processors and display the number of logical

processors. If the Logical Processor option is set to Enabled, the BIOS displays all the

logical processors. If this option is set to Disabled, the BIOS only displays one logical

processor per core. By default, the Logical Processor option is set to Enabled.

QPI Speed Allows you to set the QuickPath Interconnect data rate settings. By default, the QPI Speed

option is set to Maximum data rate.

NOTE: The QPI speed option displays only when both the processors are installed.

Other manuals for Dell PE R720XD

Questions and Answers:

Need help?

Do you have a question about the Dell PE R720XD and is the answer not in the manual?

General