Dell PowerEdge FX2 Deployment Guide

15 PowerEdge FX2 – FN I/O Module – VLT Deployment Guide | Version 2.2
4.2 Typographical conventions and common abbreviations
The following conventions are used in the command line examples in this document:
Monospace
Text
CLI (Command Line Interface) examples
Italic
Monospace
Text
Variables in CLI examples
Bold
monospace
Text
Commands entered at the CLI prompt
5 FN IOM Dell Blade I/O manager and internal port
mapping features
5.1 FN IOM Dell Blade I/O manager GUI
In previous versions of the Dell Networking Operation System (DNOS) 9.x, the FN410S, FN410T and
FN2210S FX2 switching modules were only configurable via CLI. Now, with DNOS 9.10 these FX2
switching modules can be configured for most common deployments with an easy to use GUI
application. The new “Dell Blade I/O Manager” GUI application allows IT administrators to configure
features such as:
 Configuring modes, combo ports, account credentials, SNMP parameters, uplink failure
detection and NTP through the Initial Setup Wizard
 Viewing logs and alerts and configuring settings for viewing logs and alerts
 Viewing port settings and configuring port settings, uplink ports, uplink failure detection, and
combo port settings
 Assigning VLANs, Configuring LAGs, IGMP, Port Mirroring, Fibre Channel, iSCSI, and DCB
 Configuring TACACS+, RADIUS, AAA
 Configuring FN IOM users and passwords
 Configuring Broadcast Storm Control
 Configuring Auto LAG
 Configuring the default VLAN
 Configuring NTP servers
 Rebooting the FN IOM
The features listed above allow IT administrators to quickly deploy the FX2 FN IOMs in most data
center environments. The Dell Blade I/O Manager is typically launched from the FX2 CMC > I/O

Dell PowerEdge FX2 Specifications

General

Product color	Black, Silver
Rack capacity	2U
LED indicators	Yes
Number of fans	8 fan(s)
Heat dissipation	475 BTU/h
Dell E-Value Code	PEFX2Chassis
Input current	25 A
AC input voltage	100 - 240 V
Power requirements	1600W
Operating altitude	0 - 3048 m
Storage temperature (T-T)	-40 - 65 °C
Operating temperature (T-T)	10 - 35 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Depth	851.6 mm
Width	433.5 mm
Height	86.8 mm