Dell PowerEdge R320 Planning, Installation And Service Guide

8. Select Create New VD and press ENTER.
The Create New VD screen appears. The cursor is on the RAID Level option.
9. Press ENTER to display the RAID levels.
10. Select a RAID-5 using the arrow keys, and then press ENTER.
11. Press the TAB key and then move the cursor to the list of physical disks.
12. Press the SPACEBAR key and then select disk 00:00,00:01,00:02 and 00:03 .
13. Press TAB key and then move the cursor to Advanced Settings. Press the spacebar to make the
settings active.
14. Press TAB key and then move the cursor to Initialize. Press the spacebar to make the selection.
15. Press TAB key and then move the cursor to OK and press ENTER.
The computer prompts you with the message Initialization will destroy data on the virtual disk. Are
You Sure you want to continue.
16. Press OK.
The message Virtual disk initialization complete appears.
17. Press OK.
18. Press ESC to exit.
The message Are you sure you want to exit appears.
19. Press OK to exit from the Virtual Disk Management screen.
20. Press CTRL+ALT+DELETE to restart the server.
3.5.3 Starting the TDC emulator services
If this is a TPS node with the LCNP4E board installed, start the TDC Emulator service. Perform the
following steps to start the service.
To start the TDC emulator service
1. Choose Start > Run.
The Run dialog box appears.
2. Type services.msc.
The Services page appears.
3. Right-click TDC Emulator service and click Start.
3.5.4 Checking the LCNP4e/LCNP4e2 status
If this is an Experion “T” node or a TPS node with the LCNP4E board installed, perform the following
steps to verify the LCNP4e/LCNP4e2 passed self test.
- 36 -
Chapter 3 - Installation

Dell PowerEdge R320 Specifications

General

Bus type	QPI
Stepping	M1
FSB Parity	No
Scalability	2S
Processor code	SR0LS
Processor cache	10 MB
Processor cores	4
Processor model	E5-2403
System bus rate	6.4 GT/s
Processor series	Intel Xeon E5-2400
Processor socket	LGA 1356 (Socket B2)
Processor codename	Sandy Bridge EN
Motherboard chipset	Intel C600
Processor frequency	1.8 GHz
Processor cache type	Smart Cache
Processor lithography	32 nm
Processor manufacturer	Intel
Processor package size	45 x 42.5 mm
Processor front side bus	- MHz
Processor operating modes	64-bit
ECC supported by processor	Yes
Supported instruction sets	AVX
Thermal Design Power (TDP)	80 W
Number of processors installed	1
Maximum number of PCI Express lanes	24
Memory types supported by processor	DDR3-SDRAM
Memory channels supported by processor	Triple
Memory clock speeds supported by processor	800, 1066 MHz
Memory bandwidth supported by processor (max)	25 GB/s
Maximum internal memory supported by processor	375 GB
HDD size	3.5 \
HDD speed	7200 RPM
HDD capacity	1000 GB
HDD interface	Serial ATA
Optical drive type	DVD-RW
Total storage capacity	2000 GB
Maximum storage capacity	16 TB
Number of HDDs installed	2
Memory slots	6x DIMM
Internal memory	4 GB
Memory clock speed	1333 MHz
Maximum internal memory	96 GB
Cabling technology	10/100/1000Base-T(X)
PS/2 ports quantity	-
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
PCI Express slots version	3.0
Power supply	350 W
Compatible operating systems	Microsoft Windows Server 2012 \\r Microsoft Windows Server 2012 Essentials\\r Microsoft Windows Server 2008 R2 \\r Novell SUSE Linux Enterprise Server\\r Red Hat Enterprise Linux
Sustainability certificates	ENERGY STAR
Chassis type	Rack (1U)
Processor ARK ID	64615
Intel Identity Protection Technology version	0.00

Weight and Dimensions

Width	- mm