My Account Feedback
United States
Contact Us; Live Chat Premier Login
Shop Support Community
Support Home Page
Back to Contents Page
Setting Up the Monitor
Dell™ U3011 Flat Panel Monitor User's Guide
Connecting the Monitor
Organizing Your Cables
Attaching the Soundbar (optional)
Removing the Stand
Attaching the Stand
Connecting the Monitor
WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions.
NOTE:
USB uplink cable connection enables USB ports and card reader on the monitor to work.
To connect your monitor to the computer:
1. Turn off your computer and disconnect the pow er cable.
2. Connect either the white (digital DVI-D) or the blue (analog VGA) or the black (DisplayPort) display connector cable to the corresponding video port on the
back of your computer. Do not use the three cables on the same computer. Use all the cables only when they are connected to three different computers with
appropriate video systems.
3. Connect the USB uplink cable.
Connecting the white DVI cable and the USB uplink cable
NOTE:
Your monitor supports two DVI ports. You can choose the input source (DVI-D 1 or DVI-D 2) through the OSD menu's
Input
source select option.
Connecting the blue VGA cable and the USB uplink cable
Sign In Cart