Object Qty Description
Central Inverter 1
Key 4
Installation Manual 1
M10 Screw Set 4
M12 Screw Set 2
Wire 1
Card License &
Test Report
2
4
3. Remove the central inverter from the pallet.
Figure 3-14 : Removing the Central Inverter from the Pallet
Table 3-1 : Package Contents
3.5 Package Contents
C1000 Inverter
Open/Close the door of the inverter
(Front door*2 /Back door*2)
The instruction to provide the information of safety,
installation, specification, etc.
Include of screw and nut. Reserve for DC connection.
Include of 50mm screw and nut and reserve for AC connection
Positive/negative grounding setting for PV array
M5 Screw 1
Attach positive/negative grounding setting for PV array
(12 mm long)
AC/U-type Insulator
DC insulator
1
Insulate different phase terminals and prevent them from touching
AC/L-type Insulator 1 Prevent touching with AC busbar after installation
Prevent
terminals from touching
Plastic Screw
Movable Bushing
4
1
Attach transparent Insulator
Prevent cable from being broken by the edge of the bottom plate
(Length: 3 m)
Qualification certificate and relative test data content
25
Transportation & Installation Preparation
To Next Page
Loading...
Need help?
General
