Delta C1000 User Manual

After confirming the hole size of plate, please take the movable bushing from the
package, and then install it on the plate according to the steps below.
● Installation for Movable Bushing
1. Put the movable bushing on the edge of the bottom plate.
2. Fit the movable bushing on the edge of the bottom plate.
3. Trim the movable bushing to
fit around the edge of plate.
81
Appendix B: Hole Size of plate & Installation Of Movable Bushing

Delta C1000 Specifications

General

Brand	Delta
Model	C1000
Category	Inverter
Language	English