30
1-5 Setting the MIC Input Select
1
Select “Mic Input Select” at the Auto Setup / Room
EQ Menu.
(Main unit)
(Remote control unit)
Mic In Select
*AutoSet/RoomEQ
Sets whether the setup microphone is connected to the PIN JACK connector or the MINI JACK connector.
Please ask the DENON Authorized Service Center about the usable microphone other than the option setup.
2
Display the Mic Input Select screen.
(Main unit)
(Remote control unit)
3
Select the Mic input jack or V.AUX L jack.
(Main unit)
(Remote control unit)
4
Enter The setting.
The Auto Setup / Room EQ Menu reappears.
(Main unit)
(Remote control unit)
1-6 Check the EQ parameter
1
Select “EQ parameter check” at the Auto Setup /
Room EQ Menu.
(Main unit)
(Remote control unit)
• The frequency characteristic of each speaker is rectified and the tone of the speaker is unified.
The EQ parameters that were set in Auto Setup can be checked.
This item is automatically displayed, after the measurement result of the “Auto Setup/Room EQ” is decided.
2
Display the EQ Parameter check screen.
(Main unit)
(Remote control unit)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
