86
Checking the preset stations
1
Use the “Auto tuning” or “Manual tuning” operation to tune
in the station to be preset in the memory.
2
Press the MEMORY button.
3
Press the SHIFT button and select
the desired memory block (A to G).
4
Press the CHANNEL + (UP) or –
(DOWN) button to select the
desired preset channel (1 to 8).
5
Press the MEMORY button again
to store the station in the preset
memory.
(Remote control unit)
(Remote control unit)
To preset other channels, repeat steps 2 to 5.
A total of 56 broadcast stations can be preset — 8 stations
(channels 1 to 8) in each of blocks A to G.
• The preset (broadcast) stations can be checked on the on screen display.
1
Press the ON SCREEN button repeatedly until the “Tuner
Preset Stations” screen appears on the OSD.
Preset memory
(Remote control unit)
(Remote control unit)
(Remote control unit)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
